Customized Molybdenum Sheet For Collimator And Detector Radiation Shieldings

Customized Molybdenum Sheet For Collimator And Detector For Radiation Shieldings

Molybdenum collimator description:
With the melting point at 2610℃,molybdeum parts for medical equipment(also called tungsten medical part) have excellent heat resistance.

They are applied in medical heat resistant devices, such as sputtering equipment and high temperature furnaces.

Achemetal Tungsten&Molybdenum Co., Ltd can produce tungsten medical parts according to the customer drawing.

Application:
1. Molybdeum medical parts have good properties to shield X-ray and Y-ray, because its density is higher than that of lead,
2. Collimator and detector are key components in medical CT. And collimator and detector are mainly composed of tungsten and molybdenum parts.

Features:
1. The purity of molybdenum medical parts can reach as high as 99.95% and density10.2g/cm3;
2. Their refractoriness is more than 2000℃;
3. Molybdenum medical parts are of strong wear resistance;
4. Molybdenum parts for medical use from Achemetal Furnace are uniform in material and with eligible surface roughness, good flatness, high dimension precision.

High-precision Tungsten Device for CT Collimator and Detector

Collimators are divided into two kinds in medical CT:

I.   X-ray pipe side collimator also called front collimator is mounted in front of a CT bulb pipe, and is the first part through which X rays pass.

X rays emitting out of bulb pipes are conical, and can obtain a thin light beam after passing through a tungsten device with narrow seams.

Its main function is layer thickness selection of X rays. It can control the width of X ray beams in the parallel direction of long axis of a human 

body, thus controlling the thickness of scanning layers.

II.  Detector side collimator is also called rear collimator of which narrow seams are respectively aligned with each detector, so that detectors can

only receive rays emitting into detectors vertically, so as to reduce the interference of scattered rays from other directions as much as possible.

Detectors are devices for transforming X-ray signals attenuated after absorption of human body tissues into electrical signals, and can be divided

into fixed detectors and gas detectors both of which are selected in modern CT devices.

Choosing the category of measurement systems should refer to stressed characteristics. Gas detectors are used for measuring the strength of

incident X rays by measuring the magnitude of current when gases are ionized by incident X rays according to the principle of ionization of xenon

(Xe), an inert gas. Both partition plates and collecting electrodes of gas detectors are tungsten devices.

Being consistent with the incidence direction of X rays, partition plates can achieve the effects of rear collimators, and can prevent scattered rays

generated by human bodies to be measured from entering ionization chambers. When on X ray beam enters a high-pressure

Packaging & Delivery:

Package and Inspection:
Achemetal Tungsten&Molybdenum Co., Ltd owns a complete range of manufacturing equipments. We provide you with test data of surface

roughness, density, roughness, ductility, flaw detection, dimensions and so on.

We promise our tungsten parts for medical equipments are under process of vacuum annealing furnace, ultrasonic cleaning and vacuum packing before delivery.

Owning lathes, milling machines, EDM and CNC technology, Achemetal Tungsten&Molybdenum Co., Ltd is a professional manufacturer and

supplier of tungsten parts for medical equipment in China. We also specialize in producing tungsten and molybdenum crucibles for quartz

melting or vacuum coating, tungsten and molybdenum parts for ion implantation, tungsten and molybdenum seed holder for crystal growth

furnace as well as tungsten and molybdenum connection parts with high purity and excellent mach inability. All of our tungsten medical parts are

made in accordance with the standard of ISO9001. Above 60% of our products are exported to more than ten countries and areas, such as USA,

Germany, Japan, Russia, South Korea, etc. Our tungsten medical parts have been highly recognized by customers for their excellent quality and

accuracy.

xenon cavity, xenon will be ionized, positive ions move towards the cathode while negative ions are collected by a collecting electrode (tungsten

device), to generate signal current. These signals will directly reflect the X-ray absorption amount of detectors.

Developing rapidly, medical CT technologies have developed to the sixth generation at present. The quantity of detectors is increased further,   

so the using amount of high-precision tungsten devices is increased obviously, and the devices need replacing at regular intervals.